Swing Acrylic and Bamboo Tags (with custom vinyl decal labels)

Not sure how to label those wicker storage boxes, fabric boxes or perforated containers? We have the perfect product for you! Our swing acrylic labelled tags will change everything! Use them in the laundry, bedroom, pantry or linen closet, take organisation to the next level with our gorgeous white, black or bamboo acrylic tags. 

Dimensions: 9cm x 5cm

Thickness: 3mm

Material Acrylic or bamboo-please note they are NOT flexible and can snap if bent.

Colours: White, Black, Bamboo, Nude, Clear

Read before purchasing

We recommend ordering maximum 2 word labels for it to fit the tags. If you are ordering more than 2 word labels we can't guarantee they will fit.

Please ensure you order the correct corresponding label colour to your tag, the team at LLC cannot be responsible for incorrect selections.

Price is per individual tag/label

Labels MUST be used within two weeks of receiving them. The longer you leave the labels the harder it will be to apply. 

About Custom Vinyl Labels

 
Each label is made to order and customised specifically for you. Once we design the labels, the machine cuts it, then the excess vinyl is weeded out of the decal by hand, covered with transfer tape that is used for you to install the decal onto your surface. As you can see a lengthy process goes into making your label so please ensure you order correctly. To remove vinyl labels you can add heat as vinyl melts or softens if exposed to high temperatures. Providing they are applied according to our instructions the labels are water resistant 24 hours after application. They are NOT dishwasher safe — hand wash only. 

How to apply vinyl

Your order comes with simple step-by-step instructions
Follow them slowly and carefully as rushing can ruin the decal 

• The surface you are applying the vinyl on must be completely clean and dry. Make sure the surface is free of dust, oil and dirt. Wipe surface with warm water only, do not use any chemicals, oils or acetones
• Make sure your hands are clean and dry before handling the label
• Using a flat tool (a credit card or similar) press down on the label you are about to use. This will ensure the label sticks to the clear transfer tape, making it easier to peel off the paper
• Remove backing paper from vinyl label, exposing the adhesive side. Be very careful and slow when doing this to make sure you do not tear the label in the process. If at any time the label does not want to come off the backing paper, push down the paper again in that spot, then rub label with your finger and try pulling off again. For more stubborn labels, try lifting the edge of the label with your fingernail
• Once backing paper is removed, arrange label on desired surface from centre of the letters first and work your way out. Press down firmly with a flat tool over entire label to affix
• It is suggested to leave the clear transfer tape on for 24hrs before peeling it off however, if you feel it is coming off easily you can start peeling away the transfer tape immediately.
• Peel away transfer tape slowly and gently at an angle starting from the top and pulling down. If the letters of your label start to lift with the transfer sheet, lay it back down and press on the area again until label is affixed on the surface